Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterCopperfield Chimney Liner & Rebuild in Brooklyn: What to Know First
We rebuild and reline Copperfield chimneys all over Brooklyn, and most jobs take one to two days once we’re on the roof. You’ll get an honest number before a single tool comes off the truck, and the price you hear on the phone is the price on the invoice. If your Copperfield liner is cracked, separating, or just too old to trust, call (516) 289-9316 and we’ll talk it through plain.
This page is for Brooklyn homeowners who own a Copperfield chimney system and need straight answers about liner replacement or a partial rebuild. Not a sales pitch. The facts, the costs, and what we’ve learned pulling apart Copperfield products in this borough for the better part of two decades. Wendell Pike started Top Hat Chimney in 1999, and he’s been on more Brooklyn rooftops than he can count. If it doesn’t need doing, he’ll tell you that too.
How Copperfield Products Fail - and How We Fix Them
- Copperfield stainless liners crack at the weld seams in high-heat flues. We see this most on the rigid stainless models used in older Brooklyn row houses off Flatbush Avenue where the original masonry flue runs hot and fast. The liner expands, contracts, and eventually the seam gives. The fix is a full liner replacement, sized properly to the appliance, not the old flue’s guess.
- Flexible Copperfield liners kink when they were pulled through offset flues. Brooklyn chimneys are rarely a straight shot, especially in Carroll Gardens where the older stacks jog between floors. A kinked liner restricts draft and traps creosote. We pull the old one, inspect the path with a camera, and run a new liner with a pull cone and proper support so it doesn’t bind on the way down.
- The Copperfield terra cotta flue tiles spall in freeze-thaw cycles. Brooklyn winters are hard on clay. Water gets into the mortar joints, freezes, and the tile faces flake off into the flue. By the time you see pieces in the firebox, the liner’s compromised. Depending on the damage, we either resleeve with a Copperfield-compatible stainless liner or go to a partial rebuild of the tile stack.
- Copperfield caps and crowns fail before the liner does. The cap rusts through, the crown cracks, and water runs down the outside of the liner, corroding it from the top. We replace the cap and pour a proper crown with an overhang and drip edge, then camera the liner to see if it’s worth saving. Half the time it is, and we’ll say so.
- Copperfield chimney liners installed by other outfits are sometimes undersized. We’ve pulled 6-inch liners out of flues that needed an 8-inch for the appliance that’s actually down there. An undersized liner chokes the draft, pushes smoke back into the house, and loads up with creosote faster than you’d believe. We size to the appliance and the flue dimensions, not to whatever was on the truck that day.
Our Copperfield Chimney Liner & Rebuild Process
Here’s how a Copperfield liner or rebuild job goes with us, from the first call to the last brush stroke.
- 1
You call. A live person answers, day or night. Might be Wendell. We ask what you’re seeing, what the chimney’s doing, and we give you a straight quote range before anyone shows up.
- 2
We inspect. Wendell or one of his crew gets on the roof, runs a camera down the flue, and looks at the cap, crown, and masonry. You get the footage and a plain-English verdict. No mystery recommendations.
- 3
We decide parts together. If Copperfield OEM parts make sense for your system and your budget, we use them. If a DuraFlex or HeatShield component fits better and does the same job for less, we’ll tell you why and let you choose.
- 4
We do the work. Liner goes in or the rebuild goes up. Drop cloths down, roof protected, and the site’s clean before we call it done.
- 5
We test. Draft check, smoke test, and a final camera pass so you can see exactly what you paid for.
- 6
You get the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No charge, no argument.
What Copperfield Chimney Liner & Rebuild Costs in Brooklyn
Straight numbers, because that’s how we do it. A Copperfield flexible stainless liner replacement in a Brooklyn row house runs $1,800 to $3,200 depending on flue height and access. A rigid stainless liner runs $2,400 to $4,000. If the masonry’s gone and you need a partial rebuild, expect $3,500 to $7,000. A full chimney rebuild from the roofline up starts around $8,000 and goes from there.
What moves the price: roof pitch and access, how many stories of scaffolding we need, whether the existing liner comes out clean or fights us, and whether the crown and cap need replacing at the same time (they usually do). We’ll give you the exact number before work starts. Call (516) 289-9316 for a free estimate, and remember the $40 off any repair over $200, plus a 10% discount for seniors and veterans, no questions asked.
Why Brooklyn Homeowners Call Top Hat Chimney for Copperfield Work
We’ve been at this since 1999, and Wendell puts his name on every job. Not a franchise that rotated in last spring. Not a call center. You call, a live person answers, and the crew that shows up is background-checked and in uniform. They’ll give you a real arrival window and call if it slips. When your Copperfield liner’s done, we hand you the 90-Day Done Right Promise in writing. If it’s not right, we come back. And because we work with DuraFlex, HeatShield, Gelco, Olympia, Famco, and Copperfield every week, we’ll tell you honestly which brand and part fits your chimney best. Ask anyone on your street.
FAQs
As an independent Copperfield service provider, we can’t speak for Copperfield’s warranty department, but using a properly sized stainless liner installed to code generally keeps your system serviceable. We use OEM parts when they’re the right call and quality aftermarket parts when they’re not. We’ll show you the difference in writing before you spend a dollar.
The camera tells you. If the liner’s cracked or separated but the masonry’s sound, we reline it. If the brick and mortar are gone, the crown’s failed, and water’s been getting in for years, you’re looking at a rebuild. We’ll show you the footage and give you a straight answer. Call (516) 289-9316 to schedule an inspection.
We’re usually on the roof within a few days of your call, and most liner replacements are done in one to two days once we start. If it’s a hazard, we’ll flag it and work with you on timing. No trip charge inside our service county, and we’ll never make you wait on a call center.
Sometimes, but rarely for long. A section repair on a Copperfield flexible liner buys you a season or two, but the metal’s already fatigued. We’ll give you the repair price and the replacement price and let you decide. If we honestly think the repair’s throwing good money after bad, we’ll say so.
You risk a chimney fire or carbon monoxide leaking back into the house. A cracked liner lets heat and gases reach the wood framing around the flue. That’s not a scare, it’s physics. If you’re on the fence, have us camera it. The footage doesn’t have a sales pitch.
Call (516) 289-9316 for a free estimate on your Copperfield chimney liner or rebuild. Wendell or one of his crew will answer, and you’ll get the truth about what your chimney needs and what it doesn’t.
Written by Wendell Pike, Owner, Top Hat Chimney at Top Hat Chimney, serving Brooklyn and nearby areas.