Olympia Chimney Flue Liner Replacement Nationwide

Olympia Chimney Flue Liner Replacement: The Brooklyn Owner’s Guide

We stock and install Olympia Chimney-compatible flue liner replacement in Brooklyn, with most replacements running $1,900-$3,400 installed depending on length, diameter, and roof access. We keep common sizes on the truck, so many Brooklyn jobs are done in a single visit. Homeowners usually discover the liner has failed one of two ways: a chimney inspection after years of skipped cleanings, or a water stain spreading across the ceiling near the chimney. Either way, the flue liner is the one part of your Olympia Chimney system that works hardest and gets looked at least.

Call (516) 289-9316

Your flue doesn’t care how the fire looks. It cares how it breathes. When the liner goes, the chimney stops doing its job safely, and no amount of sweeping brings it back.

Key takeaways:

• Olympia Chimney flue liners typically fail from condensation, age, or a chimney fire, not from normal use.
• We match the liner to your Olympia Chimney model and measure on-site, so you’re not guessing.
• Bottom line on pricing before any tool comes off the truck – the number we quote is the number on the invoice.
• Replacements in Brooklyn usually take half a day to a full day, depending on the liner height and whether scaffolding is needed.

Which Olympia Chimney Models This Applies To

Olympia Chimney makes liners and venting components that end up in a lot of Brooklyn chimneys, especially older masonry flues that were relined in the 1990s and 2000s. The liner itself is typically a stainless steel flexible or rigid tube, and the compatibility question comes down to diameter and connection type, not the Olympia Chimney model year. Most Brooklyn homes use 5.5-inch, 6-inch, or 8-inch liners. If you can find the label on the cap or the exposed section at the top, it will tell you the diameter. If not, we measure it ourselves on site and confirm it against the appliance you’re venting – furnace, boiler, or wood stove.

One thing worth knowing: an Olympia Chimney liner is just the inner tube. The cap, flashing, and connector at the appliance are separate parts, and they fail at different rates. We stock Olympia Chimney-compatible liners alongside DuraFlex, HeatShield, and Gelco options. Top Hat Chimney is an independent service provider, not affiliated with Olympia Chimney, but we’ve been installing and servicing their components across Brooklyn for years. If your liner is from another brand, we can usually match it without ripping out anything that’s still sound.

When a customer asks about OEM versus aftermarket, my answer is simple. A quality 316L stainless liner works fine whether it says Olympia Chimney on the box or not. What matters more is gauge, diameter, and how it’s connected. We use what we’d put in our own chimneys.

Signs Your Olympia Chimney Flue Liner Replacement Is Failing

• Water stains or damp drywall near the chimney. Condensation inside a failing liner seeps through masonry and shows up as a brown stain. By the time you see it, the liner has usually been leaking for a season or two.
• Flakes of metal or rust in the firebox or at the base of the cleanout. A stainless liner that flakes means the inner wall is corroding. In Brooklyn, salt air and wet winters speed this up on older roof exposures.
• A smell like a campfire inside the house, even when there’s no fire. Cracks or separation let flue gases linger instead of drafting up and out. That smell is the liner telling you it’s no longer sealed.
• The damper is rusted open or stuck. A failing liner often lets enough moisture down that the damper corrodes, and then you’ve got two problems instead of one.
• You had a chimney fire and nobody looked inside afterward. A chimney fire gets hot enough to warp a liner, even if the outside of the chimney looks fine. Every chimney fire deserves a camera inspection, no exceptions.

The camera footage and a plain-English verdict – every time, no exceptions. If the liner is fine, we’ll say so. If it isn’t, you’ll see it with your own eyes before we recommend a single dollar of work.

Replacement Cost & What’s Included

In Brooklyn, a full Olympia Chimney-compatible flue liner replacement runs most homeowners between $1,900 and $3,400 installed. The range comes down to four things: liner length, diameter, roof pitch and access, and whether the old liner needs to be pulled or can be run alongside the existing one. A straight two-story rowhouse chimney with an easy roof is on the lower end. A three-story brownstone with a steep slate roof and no interior access is on the higher end.

Every job includes the liner itself, the top plate and rain cap, the connector at the appliance, insulation if the local code and the flue location call for it, and a camera inspection before and after. The before ensures we’re replacing the right thing. The after proves it’s seated correctly. Our work is backed by the 90-Day Done Right Promise in writing, and you’ll get upfront pricing before we touch anything. That’s how Wendell Pike has run Top Hat Chimney since 1999.

Call (516) 289-9316 for a free estimate. We’ll give you a real number, not a maybe.

DIY or Call Us?

You can safely check a few things from the ground: look for rust stains on the chimney exterior, check the firebox for flakes, and note any new water marks inside the house. Those observations help when you call us, but they won’t tell you whether the liner is sound. Replacing a flue liner means working on a roof, often with a ladder on a sloped Brooklyn roofline, and pulling a metal tube through a masonry flue without tearing the existing cap or crown apart. That’s not a weekend job, and it can go wrong in ways that cost more than the original repair.

If your liner is cracked, corroded, or you’ve had a chimney fire, we’ll handle it. We’re on Brooklyn roofs all year, and we bring our own scaffolding when the pitch demands it. If it doesn’t need doing, I’ll tell you that too. But if it does, you’ll want a sweep who’s been on this exact roof before, not a first-timer with a pickup and a YouTube video.

Call (516) 289-9316 and we’ll schedule the inspection and camera check.

FAQs